1:18 Ducati Multistrada 1200R WiP + need help???

[BL4CK5H33P]

This is my 1:18 Ducati Multistrada 1200R WiP - so far, I have swapped out the windscreen/headlamp assembly for a smaller, more "street fighter" style part - swapped the wheels & tires for the 1s seen here w/ the red stripe on the rim lip - added some extra pad on the seats & swapped out the single exhaust for a dual style unit - still need to incorporate the rear turn signals back in somehow - but I need suggestions for a pair of round headlamps that would flank either side of the rectangular single lamp (they would be mounted to the front turn signals (since it has them built into the barkbuster style grip covers) - any1 got any ideas on parts that might be suitable??? I want to actually try a triple round setup & then cage it with a "halo" & offroad rock screens...

 

[K-Tiger]

Perhaps there's a 1:18 dirt/Enduro bike that will work?


I would think any appropriatly-sized bead with the right aplication of sanding would work in a pinch, though.

 

[BL4CK5H33P]

Perhaps there's a 1:18 dirt/Enduro bike that will work?


I would think any appropriatly-sized bead with the right aplication of sanding would work in a pinch, though.

^^^ I had considered goin' the clear bead route & placin' a smaller bead inside, to give it a modern ion projector or HID look & then just paint or sculpt a rear housing for them... may just be the only application that will be suitable enough...

 

[oddball]

nice custom! I have a couple 1 18 bikes also.