In our neighborhood there is a reform going on in one of the houses and they threw away an in-built wardrobe. I picked up a lot of plywood, cleaned it all and started a project I wanted to do for a long time: A massive cobra fortress. By following the link attached you can see the work in progress so far. The ground floor is 1 meter wide, 40 cm high and 70 cm deep, the following floor is 80 cm wide, 50 cm deep (top part) and 30 cm high. I will add two more floors, defense installations and a ramp on the left side of the ground floor which would be for vehicles getting from the ground to the top of that floor. I have no defined plans on how to go on but instead I let my inspirations thrive. In the end probably the fortress will be about 1,20 – 1,30 meters high.
Suggestions are wellcome.
http://s16.photobucket.com/albums/b2/Klausmerkel/Cobra Fortress Scale 1_18 in progress/
I have just updated the photobucket album under the link above. The fortress is not yet ready. I have added some figures and vehicles for purpose of visualization of the sizes. The top of the blue tower is 1,35 meters above ground, corresponding to about 24 meters under scale 1:18.
Suggestions are wellcome.
http://s16.photobucket.com/albums/b2/Klausmerkel/Cobra Fortress Scale 1_18 in progress/
I have just updated the photobucket album under the link above. The fortress is not yet ready. I have added some figures and vehicles for purpose of visualization of the sizes. The top of the blue tower is 1,35 meters above ground, corresponding to about 24 meters under scale 1:18.
Last edited:
