Casting ideas/questions
- Thread starter MAJOR BLOOD
- Start date
It's for "special" projects. Mainly so that other places don't be a bother. The main thread is still the place to discuss but here is good for anything that may be projects where others may get but hurt.
Yeah pretty much I'm tired of an other caster stalking my thread waiting every little I do and them tell me I can't cast that or I need permission. To much drama. I don't want to drop names but I'm sure you can figure out who it is. It starts with Aly and ends with osha.
yep. He stalks my threads over on HT. I really don't pay attention to what other casters are doing. Apparently he says there is a casters code that we don't cast what other guys are doing. I never heard of that. Especially when it comes to repros. Hes says I need to give him a nod and show respect. All I have say is that guy is BATSHIT CRAZY!
HAHA... The guy is delusional. He's just upset b/c someone has ruined his almost complete monopoly on the market. He should have not taken his customers for granted. He's realizing that he's going to have to actually work now in order to compete.
You owe him nothing.
You owe him nothing.
As far as the "code" goes, I know both Dave (Slayer) and Raginspoon have said they don't want to step on the toes of one another, but that's their decision. Aly taught Raginspoon how to do mold and cast, and Dave and Aly used to run a site together (Good-to-Go Customs) back in the day. That was until they got hit with a lawsuit for casting Star Wars stuff and then GTG broke up and that's when Broken Arrow Toys and Tri-Gate Creations came around. That's why there's a section on Broken Arrow called "GTG Lives!", or something to that effect.
As far as I'm concerned, Aly and Dave can go pound sand. They both have screwed a multitude of customers over and are notoriously known for their piss-poor Customer Service. Raginspoon has been solid in my experience though.
Again, they all have this code b/c they're buddy-buddy w/one another, but Aly has no reason to expect you to abide by their "code".
As far as I'm concerned, Aly and Dave can go pound sand. They both have screwed a multitude of customers over and are notoriously known for their piss-poor Customer Service. Raginspoon has been solid in my experience though.
Again, they all have this code b/c they're buddy-buddy w/one another, but Aly has no reason to expect you to abide by their "code".
Was that email epic? I was in such awe over it I couldnt respond to him. I only have ever known of a few big time casters that did 1:18 scale stuff and slayer is on hiatus so I don't have anything to say to him except he needs to bring his A game.
Doing mail order casting is easy by any means and I have made some mistakes but I don't hide from them and I fix them ASAP.
Doing mail order casting is easy by any means and I have made some mistakes but I don't hide from them and I fix them ASAP.
Yeah, the e-mail was ridiculous. He made it apparent that he's scared of you winning over a lot of his customers. That's his own fault. I'd keep all of those e-mails/PMs.
Nice place ya got here! And yeah, Alyosha thinks he's the end all, be all of casting. Like I said before, don't pay him any mind. Just do what you're doing.
I've gotten my first order from you, and fast considering your work load from the con, and looking forward to getting more soon as I know what I want. It's some top notch stuff in my opinion, and not having to wait forever is a bonus.
Aly doesn't know how to run it as a business, and he doesn't know how to treat people. You however, possess both traits in spades, and I applaud you for it.
I've gotten my first order from you, and fast considering your work load from the con, and looking forward to getting more soon as I know what I want. It's some top notch stuff in my opinion, and not having to wait forever is a bonus.
Aly doesn't know how to run it as a business, and he doesn't know how to treat people. You however, possess both traits in spades, and I applaud you for it.
The soundwave? I'm not going to be ready with for a week or so.
Could you wait until Sunday to let the public see that? I want to sell mine off first.
Wanna know if anyone is down for this. I can get weapons rendered in 3d models and have them printed up and then I can cast them and offer them up at a price that's affordable. Is anything anyone else hasn't done and we would want. I can make
It happen just say the word.
It happen just say the word.
Indeed!
I'm gonna throw the SA-24 Igla-S MANPADS and the RPG-29 out there, since there's a shortage of Russian items that aren't small arms.
AMT Hardballer Longslide as a novelty item?
Something .30 cal and WWII, be it an AN/M2 Stinger/M1919A4/M1919A6
PKM!
Probably should start a new thread and run it for a few days, then run a poll to narrow it down.
I'm gonna throw the SA-24 Igla-S MANPADS and the RPG-29 out there, since there's a shortage of Russian items that aren't small arms.
AMT Hardballer Longslide as a novelty item?
Something .30 cal and WWII, be it an AN/M2 Stinger/M1919A4/M1919A6
PKM!
Probably should start a new thread and run it for a few days, then run a poll to narrow it down.
I wanna try to keep it quite...I don't want other guys on my jock till they are in production. Maybe we can just do a thread like a wish list and see what they say. Oh by the way I have to mold those two things again. I tried do mold them in the heat and they didn't turn out.
I'll have to check and see what others have done. I'd love a nice G 36 but that one is in the works it looks like. A shame too because it seems it will only go to one caster to make meaning I won't see it. 
Has anyone ever done a Saiga Semi-auto shotgun? I like the Marauder AA-12 automatic but it is just a hair too big I felt.
Has anyone ever done a Saiga Semi-auto shotgun? I like the Marauder AA-12 automatic but it is just a hair too big I felt.
