Weyland-Yutani Scientist Figure

[YautjaClanLeader]

While technically "not" a military custom, there isn't really another place to put non-military customs. If that changes in the future, I humbly ask this be moved there. Without further ado, I present to you my most recent custom.

This is an upcoming character for my AVP Photonovel. He was made using a breaking bad figure, but the concept was based upon this very image with a couple of my own personal touches.

Concept Image:

Base Figure:

Walkthrough Part 1:

Walkthrough Part 2:

Front View:

Right Side View:

Left Side View:

Rear View:

 

[NSA]

Is the Walter White figure 1:18?

 

[YautjaClanLeader]

Is the Walter White figure 1:18?

1/10 scale. 6" or 7"

 

[NSA]

Oh, boo.

 

[YautjaClanLeader]

Oh, boo.

Lol. That's the scale I work in though.

 

[G.I.*EDDIE]

The EVA works quite well as webbing. Though I'm guessing even the thinnest sheet would be too thick for 1:18th webbing.

Looks good. You need to tackle the hood. There are a few methods for turning all kinds of cloth into convincing scale clothing for figures if you use thin material.

 

[YautjaClanLeader]

The EVA works quite well as webbing. Though I'm guessing even the thinnest sheet would be too thick for 1:18th webbing.

Looks good. You need to tackle the hood. There are a few methods for turning all kinds of cloth into convincing scale clothing for figures if you use thin material.

Might try that.

 

[G.I.*EDDIE]

It takes a few tries to get the right size, but if you cut a triangle shape, poke a hole in each corner and pop it over the neck before replacing the head, you can get a decent hood.